With the Neutron now in firmware update mode, you should see the SMT32 Bootloader as an option from the top drop down list.Ī pop-up window should appear saying it is installing. Open the Zadig Application and, under Options, select List Devices. With a paperclip (or similar) press hold the recessed BOOT button on the back panel of the Neutron synth, power on the Neutron synth then release the BOOT button. Open firmware update 1.2.6 instructions 2) Download the latest version of the Zadig updator from the click HERE hyperlink.

The Neutron needs to be in firmware update mode before opening Zadig to enable viewing the USB STM driver.Īttach the Neutron to your computer via USB and power on so that the device will be recognized by the computer (it will automatically install the wrong driver). STM32 BOOTLOADER wasnt an option in the drop down box, although neutron was, but no luck. Most people dont need to use but I had to and its resolved my issues. I imagine it has to do with all the different chipset drivers. Nothing against Zadig - but why do I need to install some 3rd party software to be able to run the Behringer Firmware updater correctly Cant Behringer make a Firmware updater that just works. Select STM32 BOOTLOADER from the drop down box.Ĭlick Replace Driver This will install the version of the WinUSB driver that the Neutron requires to be seen as the correct USB device. The following instructions describe updating the USB driver on your computer: 1.Ĭonnect the Neutron to the computer using a suitable USB cable.Įnsure that Options List All Devices is ticked. This issue is probably a result of the computer not having the correct USB drivers installed for the Neutron. The Updater detects the Neutron, but clicking on the Update button shows a communication error message.

My bro bought a neutron and we had similar problems upgrading the firmware.

There are no USB drivers at the BehringerMusic Tribe website for the Neutron. Ive proceeded as advised in the manual a) start the firmware updater - updater says looking for neutron b) connect the neturon via usb cable to the PC and power it up while pressing the boot button c) firmware updater says neutron detected, click update to start when I click on update I get - cannot communicate with the Neutron.

Beheringer Neutron Software Not Working Install WCID Itīeheringer Neutron Software Not Working Install WCID It.